Sliding table FIM Turn table FIM Preform Special machines
SLIDING TABLE FIM
Designed for product development and small volume production. Cycle time depends on: Number of molds and connected injection machines Complexity of molded part Material type and composition The following times per process step can be accomplished with a sliding table line: Blow-in: 1 min Heating: 1 min Cooling: 1 min  
blowing created by FE
Fiber Injection Molding Consulting Development Molds Machines Production Menu Start Contact Sitemap Disclaimer Links
Temperatur Primärheizung
max. 250°C  |  max. 482°F
Temperature for primary heating
Thermoöl/Luft |
Thermal oil/air
Druck auf Nutzfläche bis ca.
60 N/cm
2
Pressure onto usable space - up to approx.
Lichteweite für Werkzeuge in der EBS
Clearance for tools in the blow in station
Lichteweite für Werkzeuge in Pressstation
500
-
1400 mm  |  19.685 x 55.118 inches
Clearance for tools in the press station
Arbeitshöhe ohne Werkzeug
Operating height without tools
Gesamtdurchlaufzeit ca.
180 Sekunden |
seconds
Total processing time approx.
Taktrate/Ausstoß ca.
Cycle time/output approx.
Technische Daten
Nutzfläche für Werkzeuge
Technical Data
Usable space for molds
Heizmedium Primär/Sekundär
Heating medium primary/secondary
500
-
2150 mm  |  19.685 x 84.646 inches
750 mm  | 29.528 inches
180 Sekunden |
seconds
|  853,4 psi
2200 x 1500 mm | 86.614 x 59.055 inches
Sliding table FIM